Casstrom No.14 SFK Green Micarta CI13423
Search By Category
Coupled with the robust full-tang construction, the large blade of the No.14 SFK has the length to handle bigger tasks and will satisfy all your bushcraft, survival, or hunting needs - this is a knife that excels at splitting wood but also carves well. The A8 Mod steel has been selected for its toughness and if you add a small secondary bevel to the front of the blade you can even chop with this knife with a lower risk of severe edge damage.
Briefly about the version in Green micarta:
Hand-finished handle with a slim ergonomic design.
Sturdy welted sheath in vegetable-tanned European leather with a draining hole.
14 cm blade in premium A8 Mod steel that holds an edge well even during very hard use such as wood splitting.
Scandinavian grind, along with the steel properties, makes the knife robust, effective for wood carving, and easy to sharpen in the outdoors.
All Casström knives are cryo-quenched. Cryogenic hardening is a treatment process where the steel is cooled to very cold temperatures with the use of liquid nitrogen. This enhances the performance of the steel at a molecular level and in practical terms, gives the blade more wear resistance and is less prone to chipping compared to a blade with the same hardness that was not cryogenically quenched
Grind type: Scandinavian grind
Handle category: Synthetic (G10/Micarta)
Measurements: Total 260mm / Blade 140 x 28 x 4.2 mm
Sheath: Vegetable Tanned leather (European/Sustainable)
Steel type: Tool steel (Non-stainless)
Steel: A8 Mod (Not Stainless) with Cryo Quench, HRC 58-59
Briefly about the version in Green micarta:
Hand-finished handle with a slim ergonomic design.
Sturdy welted sheath in vegetable-tanned European leather with a draining hole.
14 cm blade in premium A8 Mod steel that holds an edge well even during very hard use such as wood splitting.
Scandinavian grind, along with the steel properties, makes the knife robust, effective for wood carving, and easy to sharpen in the outdoors.
All Casström knives are cryo-quenched. Cryogenic hardening is a treatment process where the steel is cooled to very cold temperatures with the use of liquid nitrogen. This enhances the performance of the steel at a molecular level and in practical terms, gives the blade more wear resistance and is less prone to chipping compared to a blade with the same hardness that was not cryogenically quenched
Grind type: Scandinavian grind
Handle category: Synthetic (G10/Micarta)
Measurements: Total 260mm / Blade 140 x 28 x 4.2 mm
Sheath: Vegetable Tanned leather (European/Sustainable)
Steel type: Tool steel (Non-stainless)
Steel: A8 Mod (Not Stainless) with Cryo Quench, HRC 58-59
Copyright © 2024 cuttingedgeknives.com.au 